Extron electronics FOXBOX Tx HDMI User Manual page 43

Auto Memory radio buttons
Select the radio button to automatically apply saved position
Auto Memory
settings when the sensed input resolution changes.
Test Patterns drop box
Select one of three built-in test patterns;
; as necessary to help adjust the color, brightness,
Alternating Pixels
contrast, and focus of the display. Select
input to the transmitter.
NOTE: You must have a video input connected, the transmitter-Tx-to-receiver-Rx fiber
cable connected, and the receiver must not be in daisy-chain mode for the receiver to
output a selected test pattern.
The test pattern turns off if the input signal rate is changed or disconnected or if power
is removed.
EDID Configuration tab
Click the
EDID Configuration
NOTE: The EDID configuration functions are available only if you are connected to the
transmitter.
Figure 23. EDID Tab
EDID is a data structure used to communicate video display information, including native
resolution and vertical refresh rate requirements, to a source device. The source device then
outputs the optimal video format for the display based on the provided EDID data, ensuring
proper video image quality.
,
Colorbars Grayscale
to output the video that is
Off
tab to access the functions described below.
FOXBOX Tx/Rx HDMI • Remote Control
, and
35