Introduction - Extron electronics FOXBOX Tx HDMI User Manual

Introduction

AVERTISSEMENT :
•
•
•
About this Guide
This guide contains information about the ultra-high performance Extron
FOXBOX Tx/Rx HDMI fiber optic transmitters and receivers (see
About the FOXBOX Tx/Rx HDMI
The FOXBOX HDMI Fiber Optic Extender is an ultra-high performance fiber optic transmitter
and receiver set for long haul transmission of HDCP-compliant HDMI video, audio, and
RS-232 control signals over fiber optic cabling. The transmitter and receiver can extend
HDMI signals up to 30 km (18 miles).
NOTE: For HDCP compliance:
WARNING: The FOXBOX Tx/Rx HDMI outputs continuous invisible light,
which may be harmful to the eyes; use with caution.
Le FOXBOX Tx/Rx HDMI émet une lumière invisible en continu
qui peut être dangereux pour les yeux, à utiliser avec précaution.
•
Do not look into the rear panel fiber optic cable connectors or into the fiber optic
cables themselves.
• Ne regardez pas dans les connecteurs de câble fibre optique sur le panneau arrière
ou dans les câbles fibre optique eux-mêmes.
•
Plug the attached dust caps into the optical transceivers when the fiber cable is
unplugged.
• Branchez les protections contre la poussière dans l'ensemble émetteur/récepteur
lorsque le câble fibre optique est débranché.
About this Guide
About the FOXBOX Tx/Rx HDMI
Features
• A FOXBOX HDMI or PowerCage FOX HDMI transmitter must be paired with a
FOXBOX HDMI or PowerCage FOX HDMI receiver.
• You must connect both fiber optic cables between the transmitter and receiver.
• A signal cannot be daisy-chained and retain HDCP compliance.
• The bidirectional Consumer Electronics Control (CEC) is not supported.
figure 1 on the next page).
FOXBOX Tx/Rx HDMI • Introduction 1