Extron electronics FOXBOX Tx HDMI User Manual page 44

Assigned EDID panel
NOTES:
• The
Assigned EDID
are connected to the transmitter and the transmitter front
panel EDID Minder hex switch is in position 1.
If the hex switch is not in position 1, the Assigned EDID
panel advises you "
To change EDID
.
from #n to #1
• "The default EDID is 720p @ 60 Hz.
The panel provides a drop-down list that lets
Assigned EDID
you manually set the EDID resolution and refresh rate and reports
the position of the transmitter front panel
Save EDID panel
The button lets you save the EDID resolution and
Save EDID
refresh rate from the transmitter HDMI Loop Thru monitor. The data is saved to the user-
captured EDID location (front panel EDID Minder hex switch position 0).
Import EDID panel
Use this panel to import EDID files to the
FOX Tx HDMI as follows:
1. Click the ( ) button to locate and
Browse
select the desired EDID file on the connected
PC. The dialog box opens (see figure 24).
Open
Figure 24. Importing an EDID
2. Navigate to the folder containing the EDID file.
3.
Select the EDID file (
1
4. Click the button (
2
Open
5. Click the button (
Import
panel control is available only if you
,
set rotary switch
EDID Minder
1 1 1 1 1 1 1 1 1 1
).
). The dialog box closes.
Open
). The EDID is imported and assigned to the input.
FOXBOX Tx/Rx HDMI • Remote Control
hex switch.
2 2 2 2 2 2 2 2 2 2
36