Scania Cv Ab 2016, Sweden - Scania PDE Operator's Manual

Specifications
Valve clearance, intake
valve
Valve clearance, ex-
haust valve
Tightening torques
Lock nut for valves
Lock nut for unit injec-
tors
OPM 250 en-GB
0.45 mm (0.018 in)
0.70 mm (0.028 in)
35 Nm (26 lbf/ft)
39 Nm (29 lbf/ft)
65
© Scania CV AB 2016, Sweden
Special tool 99 309 is used when turning from be-
low.
Special tool 99 109 is used when turning from
above.
Special tool 99 442 is used to check the height of the
unit injectors.
Miscellaneous