Renewing The Oil Filter - Scania PDE Operator's Manual

Maximum angles of inclination during opera-
tion
Maximum permissible angles during operation
vary, depending on the type of oil sump; see il-
lustration.

Renewing the oil filter

IMPORTANT!
Clean the centrifugal oil cleaner when renewing
the oil filter. Otherwise, the oil filter will be
blocked and resistance in the filter will increase.
If this happens, an overflow valve in the filter re-
tainer opens and lets the oil pass without being
filtered.
1.
Remove the old filter.
2.
Oil the rubber gasket on the new filter.
3.
Tighten the filter by hand. Never use tools,
the filter could sustain damage, obstructing
circulation.
4.
Start the engine and check for leaks.
OPM 250 en-GB 32
© Scania CV AB 2016, Sweden
Lubrication system
30°
30°
30° 30°
25°
25°
30° 30°
25°
25°
30° 30°