Introduction - Scania PDE Operator's Manual

Introduction

This Operator's Manual describes the operation
and inspection of Scania marine engines.
The engines are direct-injection, liquid-cooled,
four-stroke, turbocharged diesel engines.
The engines are available with different output
and speed settings. The normal output setting of
the engine (performance code) is indicated on
the engine data plate.
Note:
Only standard components are described in the
operator's manual. Information about special
equipment is contained in instructions from the
various manufacturers.
To ensure the maximum performance and the
longest service life for the engine remember the
following:
• Read through the Operator's Manual before
starting to use the engine. Even regular users
of Scania engines will get new information
from the Operator's Manual.
• Always follow the inspection instructions.
• Read the section on safety carefully.
• Get to know your engine so that you know
what it can do and how it works.
• Always contact an authorised Scania work-
shop.
The information in this manual was correct at the
time of going to press. Scania reserves the right
to make alterations without prior notice.
Note:
Always use Scania spare parts for inspection and
repair.
OPM 250 en-GB 3
© Scania CV AB 2016, Sweden
Introduction