Air Cleaner - Scania PDE Operator's Manual

Table of Contents

Advertisement

Air cleaner

Reading the vacuum indicator
If the indicator's red plunger is fully visible, re-
new the air cleaner filter element following the
instructions.
Renewing the filter element
Note:
Renew the filter element earlier than the inspec-
tion interval if the indicator shows red.
There is always a risk that the filter element will
be damaged when it is cleaned.
The filter element must not be cleaned in water
or be blown clean with compressed air.
WARNING!
Never start the engine without the air filter as this
could cause injury and severe engine damage.
1.
Remove the cover from the air cleaner.
2.
Renew the filter element.
3.
Carry out a check by inserting an inspection
lamp into the element and checking from the
outside that there are no holes or cracks in the
filter paper.
4.
Assemble the air cleaner.
5.
Reset the vacuum indicator by pressing the
button.
OPM 250 en-GB
A Vacuum gauge
B Filter element
56
© Scania CV AB 2016, Sweden
A
B
Air cleaner

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Di13

Table of Contents