Checks After Running - Scania PDE Operator's Manual

Checks after running

WARNING!
Block the starting device when working on the
engine. If the engine starts unexpectedly, there is
a serious risk of injury.
There is always a risk of sustaining burns when
an engine is hot. Particularly hot parts are turbo-
chargers, oil sumps, hot coolant and oil in pipes
and hoses.
• Check that the power supply has been cut.
• Fill the fuel tank. Make sure that the filler cap
and the area round the filler opening are clean
to avoid contamination of the fuel.
• If there is a risk of freezing, the cooling sys-
tem must contain enough glycol.
• If the temperature is below 0°C/32°F: Prepare
for the next start by connecting the engine
heater (if fitted).
IMPORTANT!
Check the coolant level following the first start.
Top up if necessary.
OPM 250 en-GB 25
© Scania CV AB 2016, Sweden
Starting and running