Starting And Running - Scania PDE Operator's Manual

Starting and running

Starting and running
Note:
When the engine is started for the first time, car-
ry out the inspection points listed under First
start-up in the inspection schedule. See the In-
spection section.
Always check the following before running:
• oil level
• coolant
• fuel level
• electrolyte level in batteries
• state of charge of the batteries
• condition of the drive belt.
Checks before running
Carry out a daily inspection as described in the
inspection schedule prior to operation. See the
Inspection section.
WARNING!
Block the starting device when working on the
engine. If the engine starts unexpectedly, there is
a serious risk of injury.
OPM 250 en-GB 19
© Scania CV AB 2016, Sweden