Cleaning the heat exchanger
1.
Remove the cover and pull out the cooler
core.
2.
Clean the outside of the cooler core.
IMPORTANT!
Use a paraffin-based engine cleaning agent.
3.
Remove any internal deposits using a round
rod.
4.
Replace damaged and hard O-rings.
5.
Assemble the heat exchanger.
6.
Tighten the screws to 15-18 Nm.
7.
Fit the heat exchanger according to the de-
scription.
1
2 3
4
1.
Screw
2.
Rear cover
3.
O-ring
4.
Cooler core
OPM 250 en-GB
3
5
5.
6.
7.
51
© Scania CV AB 2016, Sweden
6
3
3
Housing
Flange
Front cover
Cooling system
7
1