Injection System - Scania PDE Operator's Manual

Injection system

Type
Control system
Fuel filter
Fuel filter with water separator
Cooling system
Coolant volume, excluding radiator (dm
With heat exchanger
With keel cooling, 1 coolant circuit
With keel cooling, 2 coolant circuits
Without heat exchanger and liquid-cooled charge air cooler
Coolant temperature (°C/°F)
With heat exchanger
With keel cooling
Without heat exchanger and liquid-cooled charge air cooler
Number of thermostats
Thermostat opening temperature (°C/°F)
With heat exchanger
With keel cooling
Without heat exchanger and liquid-cooled charge air cooler
Intake system
Permissible pressure drop in the intake system with cleaned or new fil-
ter (mbar)
Permissible pressure drop in the intake system with blocked (dirty) fil-
ter (mbar)
Electrical system
Type
Starter motor, standard equipment
Alternator, standard equipment
OPM 250 en-GB
3
/US gallons)
77
© Scania CV AB 2016, Sweden
Technical data
PDE (unit injector)
EMS
Paper filter from Scania
Paper filter from Scania
40/10.6
24/6.3
20/5.3
20/5.3
90-95/194-203
83-88/181-190
83-88/181-190
1
80/176 and 87/187
75/167
75/167
30
65
2-pin, 24 V, DC
2-pin, 24 V, 7.0 kW
2-pin, 28 V, 100 A