Certification - Scania PDE Operator's Manual

Certification

An emissions certified engine fulfils the emis-
sions requirements for a particular range of ap-
plication.
On each emissions certified engine there is a la-
bel which shows which requirements the engine
fulfils. Scania guarantees that each such engine
fulfils the emissions requirements for the range
of application for which it is certified.
The following are required for the certified en-
gine to fulfil the emissions requirements once it
has been taken into service:
• Inspection is to be carried out in accordance
with the instructions in this Operator's Manu-
al.
• The inspection and repair of injection equip-
ment are to be carried out by an authorised
Scania workshop.
• The engine may only be modified with equip-
ment that has been approved by Scania.
• Seals may be broken and setting data edited
only once approval has been granted by Sca-
nia. Modifications may be made by author-
ised personnel only.
• Modifications affecting the exhaust and in-
take systems must be approved by Scania.
Otherwise, the instructions in the Operator's
Manual for the running and inspection of the en-
gine shall apply. The safety precautions on the
following pages must be observed.
IMPORTANT!
For Scania to guarantee that the engine corre-
sponds to its certified configuration, and take re-
sponsibility for any damage and injuries that
occur, inspection must be carried out as above.
OPM 250 en-GB 16
© Scania CV AB 2016, Sweden
Environment and safety