Configure Cellular Options - Digi Connect Sensor User Manual

Connect Sensor device settings
You can view or change Connect Sensor settings using Remote Manager or the CLI.
Note The Connect Sensor battery can operate 2 to 3 years when you follow standard operating
conditions. Changes to Remote Manager settings can affect battery life. For more information on
standard operating conditions, see
For more information about Remote Manager, visit
manager.

Configure cellular options

You configured necessary cellular settings during the initial Connect Sensor setup. Use these options
to review the cellular configuration. Make changes to these settings only when instructed by your
cellular service provider and when you have physical access to the device. For details about these
options, see Cellular option
CAUTION! If you make changes to cellular settings that result in a disconnected device,
you must use the CLI to reconnect it to the cellular network; see
connection. Using the CLI requires physical access to the device.
To configure cellular options:
1. Sign in to Remote
2. Click Device Management > Devices tab.
3. Double-click the Connect Sensor device you want to configure.
4. Expand the Configuration menu.
5. Click Cellular Settings.
6. Enter an appropriate value for each cellular option.
7. Apply the configuration changes:
a. Select Schedule from the Save drop-down menu.
b. Specify the schedule options:
Digi Connect® Sensor User Guide
Battery life.
definitions.
Manager.
Apply changes during the next wake cycle:
n
www.digi.com/products/cloud/digi-remote-
Configure the cellular
58