Local Interface Settings Option Definitions - Digi Connect Sensor User Manual

Local Interface Settings option definitions

The following table provides Remote Manager CLI and Bluetooth options for Connect Sensor. For additional information about using these options, see
Configure local interface settings.
Option Description
CLI Enable Enables or disables the command line interface (CLI) for local changes to the device.
Bluetooth Enables or disables the Bluetooth interface used to communicate with other devices.
Enable
Bluetooth Device Specifies the name of the Connect Sensor that appears in a list of available Bluetooth devices when pairing with a
Name nearby device.
Modbus Protocol Settings option definitions
Note The Modbus protocol is available only with Connect Sensor+ hardware.
The following table provides Remote Manager definitions for Connect Sensor Modbus protocol options. For details about setting these options, see
Enable and configure the Modbus
Option
Protocol enable
Device Status Alarm Mask
Serial framing mode
protocol.
Description
Enables or disables the Modbus protocol.
Determines whether error information should be pushed immediately
when an alarm occurs.
The transmission mode.
Range Default
On/Off On
On/Off On
Text
Range
Default
On/Off Off
On/Off
Off
RTU
RTU
ASCII
Empty