Digi Connect Sensor User Manual page 30

Get started
features. However, you will find instances of both Device Cloud and Digi Remote Manager in some
documentation, firmware, and user interfaces.
Note If you purchased Digi Bundled Services, the following steps were completed for you. You can skip
this section.
To add a device to Remote Manager:
1. Sign in to your Remote Manager account:
If you need to create an account, go to Remote Manager at remotemanager.digi.com,
n
click Sign up, and complete the form to create your account.
If you already have an account, go to Remote Manager at
n
sign in with your user name and password.
2. Locate the 15-digit device IMEI number on the Connect Sensor label.
3. Click Device Management > Devices.
4. Click Add Devices. The Add Devices dialog appears.
You cannot use the Discover button to discover Connect Sensor devices automatically because
the devices are not available on the local network.
5. From the Add Devices drop-down menu, select IMEI, and enter the number.
6. Click Add to add the device.
7. Click OK to close the Add Devices dialog. The device appears in the Device Management list.
Note If the device does not display in the Device Management list, you can "wake" the
Connect Sensor to force a connection with Remote Manager and update the data. For
instructions, see
8. Click Refresh if the device data does not appear on its own after a short period of time.
Device data appears after the first time it communicates with Remote Manager.
Digi Connect® Sensor User Guide
Update the firmware using the CLI
Add a device to Digi Remote Manager®
remotemanager.digi.com
or Update firmware from Connect
and
Sensor.
30