Device (Report) Option Definitions - Digi Connect Sensor User Manual

Option
NTP Server Name

Device (report) option definitions

The following table provides Remote Manager device (report) setting options for Connect Sensor. For details about setting these options, see
report settings.
Option Description
Specifies in number of minutes how often Connect Sensor wakes to read the
Read
enabled sensors. Use this option when the device is configured to read sensors
Sensor
more than once a day .
Every
Report Specifies in number of scheduled wake cycles when the device sends sensor data to
Sensor Remote Manager.
Data Every
Specifies in number of days how often sensor input values are sent to Remote
Read
Manager . Use this option when configuring Connect Sensor to report less than once
Sensor
per day. Set this option to 0 when Connect Sensor reports more than once per day.
Every N
Days
Description
Network Time Protocol (NTP) server name that synchronizes Connect Sensor
time with Coordinated Universal Time (UTC). This setting is configured by default.
Note Do not make changes to this setting without help from Digi Technical
Support.
Value
time.devicecloud.com
Range
5 minutes to 1440 minutes (24 hours)
1 to 288 readings
0 to 31 days
Note Digi recommends configuring
Connect Sensor to report at least once
per week.
Configure
Default
720
minutes
(12
hours)
1
0 days