Digi Connect Sensor User Manual page 47

Configure sensor and report settings
CAUTION! If Connect Sensor sends reports less than 15 minutes apart, it may result in
an internal temperature that is above the ambient temperature.
To configure device options:
1. Sign into Remote
2. Click Device Management > Devices.
3. Double-click the Connect Sensor you want to configure.
4. Click Configuration > Device Settings.
5. Enter appropriate values for each option.
Notes:
Send Location Every and GPS Enable are not supported.
n
Reporting to Remote Manager more than twice a day reduces the battery life.
n
6. Apply the configuration changes:
a. Select Schedule from the Save drop-down menu.
b. Specify the schedule options:
Digi Connect® Sensor User Guide
Manager.
Apply changes during the next wake cycle:
n
i. Select Immediate.
ii. Select the Schedule Offline check box.
iii. Click Schedule.
Apply changes on a specific date and time in the future:
n
i. Select One-Time.
ii. Choose a date and time from the drop-down menus.
Report settings
47