Digi Connect Sensor User Manual page 2

Revision history—90001491
Revision Date
A May 2016
B October
2016
C March
2017
D April 2017
E June 2017 Modified regulatory and certification information as required by RED (Radio
F July 2017
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2017 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document "as is," without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Digi Connect® Sensor User Guide
Description
Initial release.
Added C1D2 certification information.
n
Added wiring compliance information.
n
Added wire guard information.
n
Added HART protocol information.
n
Added Modbus protocol information.
n
Added continuous monitoring feature information.
n
Added Oversampling feature information.
n
Updated "Device Cloud" references to "Remote Manager".
n
Removed information about the wire guard.
n
Added ATEX certification information.
n
Added registered trademark symbol to HART® protocol.
n
Updated IP rating information for ConnectSensor and ATEX.
n
Equipment Directive).
Modified the SIM card installation instructions.
2