Cellular Cli Commands - Digi Connect Sensor User Manual

Cellular CLI commands

Use the following commands with the set command when configuring the device with the CLI. All cellular configuration values are supplied by your cellular
service provider.
CLI
Option command Description
APN apn
User Name user
Identifies the access point name that
connects your device to the correct cellular
network.
Specifies the user name for your cellular
network account.
Value options
If you purchased Digi Bundled Services,
n
this value is preconfigured for you.
If you purchased cellular service
n
through a third party, contact your
provider for this value.
Use only when required by your
n
cellular service provider.
Length: Up to 63 characters
n
Printable characters and spaces only
n
(no quotation marks or backslashes)
No value: disabled (no user name
n
required)