Set The Host System To Boot From The Livedvd (Linux) - Xilinx KCU105 User Manual

Bringing Up the Design
This chapter describes how to bring up and test the targeted reference design.
Set the Host System to Boot from the LiveDVD
(Linux)
This section is only applicable to host computers running Linux. If running Windows 7,
Note:
proceed to Configure the
1. Power on the host system and stop it in BIOS to select options to boot from the DVD
drive. BIOS options are entered by pressing DEL, F12, or F2 keys on most computers.
If an external power supply is used instead of the ATX power, the FPGA can be configured
Note:
first. Then power on the host system.
2. Place the Fedora 20 LiveDVD into the DVD drive.
3. Select the option to boot from DVD.
PCI Express Control Plane TRD
UG918 (v2017.2) July 18, 2017
FPGA.
www.xilinx.com
Chapter 3
14
Send Feedback