Xilinx KCU105 User Manual page 23

Run the Design on a Windows 7 Host Computer
After booting the Windows OS, follow these steps:
1. Repeat the steps in section
2. Open Device Manager (click Start > devmgmt.msc then press Enter) and look for the
Xilinx PCI Express Device as shown in
X-Ref Target - Figure 3-9
PCI Express Control Plane TRD
UG918 (v2017.2) July 18, 2017
Disable Driver Signature Enforcement, page
Figure 3-9: Xilinx PCI Express Device in Device Manager
www.xilinx.com
Chapter 3:
Figure 3-9.
Bringing Up the Design
9.
UG918_c3_11_040715
23
Send Feedback