Xilinx KCU105 User Manual page 13

6. Connect the ATX power supply to the KCU105 board using the ATX power supply
adapter cable as shown in
A 100 VAC–240 VAC input, 12 VDC 5.0A output external power supply can be substituted for
Note:
the ATX power supply.
X-Ref Target - Figure 2-4
7. Slide the KCU105 board power switch SW1 to the ON position (ON/OFF is marked on the
board).
PCI Express Control Plane TRD
UG918 (v2017.2) July 18, 2017
Figure 2-4.
Figure 2-4: Power Supply Connection to the KCU105 Board
www.xilinx.com
Chapter 2: Setup
UG918_c3_02_040715
13
Send Feedback