Xilinx KCU105 User Manual page 34

4. In the Flow Navigator panel, under Simulation, click Run Simulation and select Run
Behavioral Simulation. This generates all the simulation files, loads the Vivado
simulator, and runs the simulation. The result is shown in
X-Ref Target - Figure 4-6
Figure 4-6: Base Design Behavioral Simulation using the Vivado Simulator
PCI Express Control Plane TRD
UG918 (v2017.2) July 18, 2017
Chapter 4: Implementing and Simulating the Design
www.xilinx.com
Figure 4-6.
UG918_c4_06_070717
Send Feedback
34