Xilinx KCU105 User Manual page 18

4. Configure the wizard to establish connection with the KCU105 board by selecting the
default value on each wizard page. Click Next > Next > Next > Finish.
a. In the hardware view, right-click xcku040 and click Program Device
X-Ref Target - Figure 3-4
PCI Express Control Plane TRD
UG918 (v2017.2) July 18, 2017
Figure 3-4: Select Device to Program
www.xilinx.com
Chapter 3: Bringing Up the Design
(Figure
UG918_c3_06_070717
Send Feedback
3-4).
18