Xilinx KCU105 User Manual page 12

Install the KCU105 Board
1. Remove all rubber feet and standoffs from the KCU105 board.
2. Power down the host chassis and disconnect the power cord.
Remove the power cord to prevent electrical shock or damage to the KCU105 board or other
CAUTION!
components.
3. Ensure that the host computer is powered off.
4. Open the chassis. Select a vacant PCIe Gen3-capable expansion slot and remove the
expansion cover at the back of the chassis.
5. Plug the KCU105 board into the PCIe connector slot, as shown in
X-Ref Target - Figure 2-3
PCI Express Control Plane TRD
UG918 (v2017.2) July 18, 2017
Figure 2-3: PCIe Connector Slot
www.xilinx.com
Chapter 2: Setup
Figure 2-3.
UG918_c3_01_091314
12
Send Feedback