6. Exit the BIOS and let the system boot.
7. On most systems, this gives a second reset on the PCIe connector, which should discover
the device during enumeration.
To know that the PCIe Endpoint is discovered, see
°
If the PCIe Endpoint is not discovered, reboot the system. Do not power off.
°
PCI Express Control Plane TRD
UG918 (v2017.2) July 18, 2017
www.xilinx.com
Chapter 3:
Bringing Up the Design
Check for PCIe Devices, page
Send Feedback
21.
20