Maintenance - Canon imagePRESS C7010VPS Operating Information Manual

Introduction to the 'Maintenance' section

Maintenance

Introduction to the 'Maintenance' section
Introduction
The maintenance section displays the following information.
'Billing counters'
The 'Billing counters' section displays the total number of prints that have been made
since the machine was installed. Which counters there are visible depends on the region.
You cannot reset the billing counters.
'Day counters'
The 'Day counters' section displays the number of prints that have been made since
the counter was last reset to 0. You can, for example, reset the day counters at the be-
ginning of a working day or before you start a new job for a particular customer.
Furthermore the maintenance section gives access to the following functions.
'Start maintenance'
From the maintenance section you can start the maintenance and calibration proce-
dures.
'Go to the service mode'
332 Chapter 11 - Maintenance and calibration