Change the output settings before
printing
Change '2-sided' into '1-sided' and vice versa
Introduction
Jobs for which '1-sided' or '2-sided' printing was defined, will be printed on either 1 side
or both sides of a sheet. If required, you can change this setting.
How to change '2-sided' into '1-sided' and vice versa
Touch 'Jobs' -> 'Waiting jobs'.
1.
Touch the job of which you want to change the number of sets.
2.
#
NOTE
You can only change the settings of the active print job
printer (press the 'Stop' button 2x).
Touch 'Properties' - or touch the job 2x to open the 'Properties' window.
3.
Touch the '1- or 2-sided' button.
4.
Touch the desired value.
5.
Touch'OK'.
6.
Press 'OK'.
7.
Change '2-sided' into '1-sided' and vice versa
after you stopped the
Chapter 6 - Print jobs
157