Panel - Canon imagePRESS C7010VPS Operating Information Manual

Access Settings Editor settings via the operator panel
Access Settings Editor settings via the operator panel
Introduction
#
NOTE
The information contained in this section is primarily intended for key operators and
system administrators.
The Settings Editor application on the PRISMAsync controller is a web based application
that allows key operators and system administrators to adapt the system completely to
the situation in an organization and production environment. The Settings Editor allows
key operators and system administrators to manage settings with regard to network con-
figuration, system preferences, job preferences and media, for example.
For convenience reasons, a subset of frequently used settings is accessible through the
operator panel.
#
NOTE
You need the key operator PIN or the system administrator PIN to make changes in
this section. This PIN is the same as used when accessing the Settings Editor applica-
tion on the PRISMAsync controller.
Settings available through the operator panel
Group of settings
'About'
'Software licenses'
316 Chapter 10 - Adapt printer settings to your needs
#
Available settings
'Serial number'
(read-only)
'Version of
printer soft-
ware' (read-on-
ly)
'Upload license'
Short description
The 'About' section allows you to look
up the serial number and software version
of the printer. You can also upgrade the
printer software through this section.
Follow the instructions on the operator
panel when you upgrade the software.
When you have a new license to activate
a new feature on the printer, you can up-
load the license through this section. After
uploading the license, the feature becomes
active.
Follow the instructions on the operator
panel when you upgrade the software.