Change the print delivery settings
Change the print delivery settings
Introduction
Usually the print delivery settings have been defined in the printer driver.
Overview of the print delivery settings
#
Setting
'Output location'
'Sort'
'Offset stacking'
'Advanced settings'
164
Chapter 6 - Print jobs
Description
Change the output location for the job. The list shows all
the output locations that are available for your system.
Make sure there is a match between the selected output
location and the job requirements. For example, when a
job requires staples, you must select an output location that
allows stapling.
Change the sorting method of the prints. You can select
sort 'By page' or 'By set'.
[149] Sort by page
[150] Sort by set
Stack the prints with an offset.
This setting is only available when the 'Offset stacking'
setting of the active 'Workflow profile' is set to '<html>Sets
(as in job)</html>'.
Finishing equipment often requires that the printed sheets
are delivered in a certain order. For finishers that are inte-
grated in your printing system, the required settings are
adapted automatically. However, sometimes it can be nec-
essary to change a number of settings manually, for example
when you want to finish the prints using offline finishers.
If required, you can change the 'Sheet order', 'Sheet orien-
tation', 'Print order' and 'Rotation'.