Change The Use Of Separator Sheets - Canon imagePRESS C7010VPS Operating Information Manual

Change the use of separator sheets

Change the use of separator sheets
Introduction
Separator sheets are empty sheets that are automatically inserted before each new set or
job to separate two sets or jobs. In the Settings Editor you can define the media that must
be used as separator sheets. The use of separator sheets can be enabled via the automated
workflows in the Settings Editor. However, you can change this setting trough the oper-
ator panel.
How to change the use of separator sheets
Touch 'Jobs' -> 'Waiting jobs'.
1.
Touch the job of which you want to change the settings.
2.
#
NOTE
You can only change the settings of the active print job
printer (press the 'Stop' button 2x).
Press 'Properties'.
3.
Touch the 'Separator sheets' button to toggle between 'On' and 'Off'.
4.
Press 'OK'.
5.
Introduction to automated workflows, on page 319
152 Chapter 6 - Print jobs
after you stopped the