Originals - Canon imagePRESS C7010VPS Operating Information Manual

Copy non-standard size originals
Copy non-standard size originals
Introduction
You can use the automatic document feeder to copy originals in a simple and quick way.
The automatic document feeder supports the following standard media sizes.
Media sizes that the automatic document feeder supports
ISO sizes
A5
A5R
A4
A4R
A3
B5
B5R
B4
The document feeder supports non standard sizes from 139,7 x 182 mm to 630 x 297
mm / 5,5" x 7,17" to 24,80" x 11,30".
If more than one media fits, the user must select the desired media. The selected media
will be the default media.
The glass plate is the location where you usually place originals that the automatic docu-
ment feeder cannot handle. The glass plate cannot detect the dimensions of your original.
When you copy from the glass plate, you must always define the size of your original.
How to copy non-standard size originals
Place the originals face up into the ADF, or place 1 original face down on the glass plate.
1.
Touch 'Jobs' -> 'Copy/Scan' -> 'Copy job'.
2.
In the 'Original' section, touch 'Size'.
3.
Use the - and + buttons to enter the correct media size.
4.
Press 'OK'.
5.
The 'Size' button displays the defined size.
In the 'Output' section, touch 'Media'.
6.
Select a media from the list and touch 'OK'.
7.
The setting 'Zoom' determines how the copy will look. When 'Zoom' ->'Fit to page' is
enabled, the original will be scaled to fit the media size of the output. When 'Zoom' ->
'Fit to page' is disabled, you can enter a custom zoom percentage.
202 Chapter 7 - Copy jobs
#
US sizes
Legal
Letter
Letter-R
STML
13" x 19.2" (330.2 x 487.7 mm)
12" x 18" (305 x 457 mm)
11" x 17" (279 x 432 mm)