Canon imagePRESS C7010VPS Operating Information Manual page 48

The stacker/stapler, optional inserter and optional integrated punch unit
Cross Section
[23]
#
IMPORTANT
Saddle press is automatically used when you select booklet.
#
NOTE
To make sure that saddle pressing is effective, you must saddle stitch more than nine
sheets of paper (including one cover sheet).
Punching
#
IMPORTANT
Punching is available only if the Puncher Unit-BB1/BC1/BD1 or Professional
Puncher-B1 is attached.
Only the following paper size can be hole punched:
A3, B4, A4, A4R, B5, or B5R / 11" x 17", LGL, LTR, LTRR, or EXEC
When the Puncher Unit-BC1 is attached, only A3 or A4 paper can be punched
in four holes.
If only the optional Puncher Unit-BB1 is attached, the machine automatically
selects how many holes to punch depending on the selected paper size.
- Two holes in case of LGL and LTRR
- Three holes in case of 11" x 17", LTR and EXEC
Holes cannot be punched in paper heavier than 201 g/m2 / 54 lb Bond, vellums,
transparencies, labels, or pre-punched paper.
Paper that is fed from the optional Document Insertion Unit-C1 cannot be hole
punched.
#
NOTE
The distance between the punch holes is shown in the illustration below
48 Chapter 2 - Main parts
Cross Section