Load tabs via the tab feeder (optional)
#
IMPORTANT
Hold the tab paper by hand to avoid lifting the paper holder after loading the tab
paper.
#
IMPORTANT
Keep the rear guide on the left of the paper tray. Do not approach the rear guide
to the tab feeder.
If the tab paper is curled, image blurring may occur. In this case, straighten out
the curled paper, and reload it.
Make sure that the height of the paper stack does not exceed the loading limit
mark
Gently push the paper tray back into the machine until it clicks into place in the closed
10.
position.
#
When returning the paper tray to its original position, be careful not to get your
fingers caught, as this may result in personal injury.
#
IMPORTANT
Never place paper or any other items in the open part of the paper tray next to the
paper stack. Doing so may cause a paper jam or damage the paper tray.
Adjust the media size of the tab feeder (optional), on page 269
268
Chapter 9 - Paper, toner, and staples
at the back of the paper tray.
CAUTION