Adjust The Media Size For The Bulk Media Module - Canon imagePRESS C7010VPS Operating Information Manual

Align the inner size change plate with the marks for the desired paper size.
14.
#
IMPORTANT
Make sure to align the size change plate properly with the marks for the desired
paper size. There are two marks for paper size at the top of the paper tray. Align
the size change plate with the desired marks.
Make sure that the size change plate is properly aligned with the marks for the
desired paper size. If the size change plate is not properly aligned, the paper tray
may become damaged.
Fix the inner size change plate with the two blue screws using a coin or something similar,
15.
while slightly holding its centre front portion, and pressing it away from you.
#
IMPORTANT
If you fasten the blue screw without pressing the inner size change plate away from
you, the plate may be fixed at an angle. If you use the paper tray with a tilted inner
size change plate, paper may be fed as slanted, poor print quality may result, and paper
jams may occur. Therefore, make sure to fasten the blue screw while pressing the inner
size change plate away from you.
Adjust the media size for the bulk media module (optional)
B4
B5
11 17/LTR
A3
A4
12 18
305 457 12 5 / 17 11 /
mm mm 8 16
320 450
mm mm
13 19
(SRA3)
330 483
mm mm
Chapter 9 - Paper, toner, and staples 247