When returning the staple case, always make sure that the staple case is inserted until the
arrows are aligned as shown in the diagram.
#
IMPORTANT
Follow steps 3 to 8 to replace the other staple cartridge in the saddle stitcher unit.
Gently push the saddle stitcher unit (F-C4) back into the machine.
9.
Always make sure to push the saddle stitcher unit in as far as it can go.
#
When returning the saddle stitcher unit to its original position, be careful not
to get your fingers caught, as this may result in personal injury.
Replacing the staple cartridge in the saddle stitcher unit
CAUTION
Chapter 9 - Paper, toner, and staples
303
Need help?
Do you have a question about the imagePRESS C7010VPS and is the answer not in the manual?
Questions and answers