Panel - Canon imagePRESS C7010VPS Operating Information Manual
Hide thumbs
Also See for imagePRESS C7010VPS:
- Operation manual (391 pages) ,
- Safety instructions (33 pages) ,
- Program manual (13 pages)
Table of Contents
Advertisement
Adjust the brightness and contrast of the operator panel
Introduction
You can adjust the brightness and contrast of your monitor to improve the readability of
the operator panel. The required brightness and contrast settings can depend on the
lighting in your room, for example.
#
Setting
'<html>Auto ad-
just</html>'
'<html>Bright-
ness</html>'
'<html>Con-
trast</html>'
How to adjust the brightness and contrast of the operator panel
Touch 'System' -> 'Setup' -> 'Operator panel settings'.
1.
Touch '<html>Auto adjust</html>' to optimize the brightness and contrast of the screen
2.
automatically.
Touch 'OK' when the brightness and contrast are OK, or continue with the steps below
3.
when these settings are not yet OK.
Touch '-' to decrease or '+' to increase the '<html>Brightness</html>'.
4.
Touch '-' to decrease or '+' to increase the '<html>Contrast</html>'.
5.
Press 'OK'.
6.
Adjust the brightness and contrast of the operator panel
Description
The screen of the operator panel will automatically set the
correct ratio of brightness and contrast.
You can increase or decrease the brightness from level 20
to 100 in steps of 1. The factory default value is 80. Higher
values will increase the brightness.
You can increase or decrease the contrast from level 10 to
100 in steps of 1. The factory default value is 50. Higher
values will increase the contrast.
Chapter 10 - Adapt printer settings to your needs
315
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePRESS C7010VPS and is the answer not in the manual?