Control Circuit Analog/Digital - KEB COMBIVERT G6 series Installation Manual

4.

Control Circuit Analog/Digital

The control circuit provides the following analog and digital functions:
• Hardware allocation of digital and analog inputs and outputs.
• Diagnostic interface (parameter display, scope mode)
• Hardware of the control circuit „safety separated" according to EN 61800-5-1 (base TN-
C/-S mains)
• Operation and diagnosis via LCD display and 8 keys keyboard or error LED.
• Provide Allocation of power module parameters for the parameterization for not supplied
voltage power module.
• Safety function (two channel torque off)
4.1 Overview (type-specific)
No. Description
1 Diagnostic interface X4A
2 Safety function X2B
3 Control terminal strip X2A
4 LCD display
5 Touch pad keyboard
4.1.1 Execution without display/keyboard
The control can be ordered without display/keyboard for applications when no local operation
is necessary. A status LED is used for the display of the inverter status for the variant without
display/keyboard.
LED status
off
on
flashing
2
3
1
2
1
Function
Unit switched off
Unit ready for operation
Unit in malfunction
Control
32
31
GB - 23
4
5