Control Circuit Analog/Digital; Overview (Type-Specific); Execution Without Display/Keyboard; Figure 1: Overview - KEB COMBIVERT G6 Instructions For Use Manual

CONTROL CIRCUIT ANALOG/DIGITAL

3 Control Circuit Analog/Digital
The control circuit provides the following analog and digital functions:
•
•
•
•
•

3.1 Overview (type-specific)

No. Description
1 Diagnostic interface X4A
2 Safety function STO X2B
(optional)
3 Control terminal strip X2A
4 Inverter status LED1
5 Display/keyboard (optional)
Figure 1: Overview

3.1.1 execution without display/keyboard

The control can be ordered without display/keyboard for applications when no local
operation is necessary. A status LED is used for the display of the inverter status for the
variant without display/keyboard.
LeD status
Off
On
Flashing
Hardware allocation of digital and analog inputs and outputs.
Diagnostic interface (parameter display, scope mode)
Hardware of the control circuit „safely separated" according to EN 61800-5-1 (base
TN-C/-S mains)
Optional operation and diagnosis via LCD display and 8 keys keyboard or status LED.
Optional with safety function STO (separate manual)
3
2
1
function
Unit switched off
Unit ready for operation
Unit in malfunction
4
5
15