Annex
Annex B
B.1
Certification
B.1.1
CE Marking
CE marked frequency inverters and servo drives were developed and manufactured to com-
ply with the regulations of the Low-Voltage Directive 2006/95/EC.
The inverter or servo drive must not be started until it is determined that the installation com-
plies with the Machine directive (2006/42/EG) as well as the EMC-directive (2004/108/EC)
(note EN 60204).
The frequency inverters and servo drives meet the requirements of the Low-Voltage Direc-
tive 2006/95/EC. The harmonized standards of the series EN 61800-5-1 in connection with
EN 60439-1 and EN 60146 were used.
This is a product of limited availability in accordance with IEC 61800-3. This product may
cause radio interference in residential areas. In this case the operator may need to take cor-
responding measures.
B.1.2
UL Marking
- in preparation -
B.2
Further informations and documentation
You find supplementary manuals and instructions for the download under
http://www.keb.de > Service & Downloads > Downloads
General instructions
•
EMC and safety instructions
•
Manuals for further control boards
Service notes
•
Download of parameter lists
•
Error Messages
Instruction and information for construction and development
•
Preparation of a user-defined parameter menu
•
Programming of the digital inputs
•
Input fuses in accordance with UL
•
Application manual (access for registered customers)
•
Motor configurator to select the appropriate inverter and to create downloads for parame-
terizing the inverter.
Approvals and approbations
•
Declaration of conformity CE
Others
•
COMBIVIS, the software for comfortable parameterization of the inverters via PC (available
per download or as DVD)
GB - 40