Maintenance and Adjustment
Street Cup, Thruxton, Thruxton R
and Bonneville T120
1
cizx
1.
Wire retainer
2.
Headlight bulb
While
supporting
disconnect
the
connector from the headlight bulb.
Remove the rubber dust cover.
Unhook
the
headlight
retainer.
The headlight bulb can now be removed.
Installation is the reversal of removal.
The position bulb is situated within the
headlight assembly and is a sealed,
maintenance-free LED unit.
Daytime Running Lights
(if equipped)
The Daytime Running Lights (DRL) are
situated within the headlight assembly
and are sealed, maintenance free LED
units. If DRL are equipped then there is
no position bulb.
132
2
the
light
unit,
multipin
electrical
bulb's
wire
Headlight Adjustment
Note:
•
Always make sure the handlebars
are in the straight ahead position
when checking and adjusting the
headlight beam setting.
1
1.
Headlight assembly mounting bolt
Vertical adjustment of the headlight
beam is controlled by loosening the
headlight assembly mounting bolts and
altering the position of the headlight
assembly.
Retighten
the
adjustment to 89 lbf in (10 Nm).
fasteners
after