Error Action - Printronix ThermaLine T5000r User Manual

For more information on choosing a value for the Number of Codes
parameter, see "Setting Number Of Bar Codes On A Form" on
page 50.

Error Action

The printer response is the same whether the error stems from a
bad or missing bar code. It is determined by the Validator Action
setting in the VALIDATOR menu:
. .
1. Press to take the printer offline and place the printer in
.
Menu mode.
2. If necessary, press ↓ and
↵
key.
. .
3. If necessary, press
.
4. Press ↓ until Validator Action displays.
5. Press + or – to scroll through the choices:
• Retry Form (default)
Stop & Retry
•
Grade&Report
•
Rescan Form
•
Rescan&Retry
•
• Rescan&Stop
• Stop
• Overstrike
These options are described in detail below.
↵
6. Press to select the desired value.
↵
7. Press ↓ and
at the same time to lock the
PAUSE to take the printer offline.
8. Press PAUSE again to put the printer online.
↵
at the same time to unlock the
until VALIDATOR displays.
↵
key, then press
Error Action
79