Printronix ThermaLine T5000r User Manual page 65

The following is a sample scan report of a Code 39, 10 mil bar code
containing "*RJS8702*" with a quiet zone violation:
S C A N R E P O R T
E R R O R : B a r c o d e q u i e t z o n e t o o s m a l l
B a r c o d e D a t a : [ S T ] R J S 8 7 0 2 [ S T ]
S y m b o l o g y
O v e r a l l G r a d e
X d i m e n s i o n ( m i l s )
D e c o d e a b i l i t y ( % )
M o d u l a t i o n ( % )
S y m b o l C o n t r a s t ( % )
E d g e C o n t r a s t ( % )
D e f e c t s ( % )
R m i n / R m a x
P C S
P e r c e n t D e c o d e ( % )
B a r D e v i a t i o n A v g ( % )
M i n . B a r D e v i a t i o n ( % )
M a x . B a r D e v i a t i o n ( % )
R a t i o
G o o d S c a n s
T o t a l S c a n s
Scan Profile
This is an executable menu that prints the scan reflectance profile
of a bar code placed in the validator scan beam.
NOTE: You will need a minimum installed label width of 2 inches
to support the Scan Profile printout.
. .
1. Press to take the printer offline and place the printer in
.
Menu mode.
2. If necessary, press ↓ and
↵
key.
. .
3. If necessary, press
.
4. Press ↑ until Scan Profile displays.
5. Place a bar code in the scan beam path.
↵
6. Press to scan the bar code.
7. When prompted on the control panel, remove the scanned bar
code.
↵
8. Press to print the scan profile.
Advanced Validator Options
C o d e 3 9
C ( 2 . 1 )
0 9 . 9
6 5
3 4
6 8
3 0
1 4
2
9 2
1 0 0
- 1 6
- 3 1
- 4
2 . 0
2 8
3 0
↵
at the same time to unlock the
until VALIDATOR displays.
65