Printronix ThermaLine T5000r User Manual page 40

Chapter 2
Basic Validator Setup
Time RESET Button Is Depressed
Less than 2 seconds
More than 4 but less than 6 seconds
More than 6 seconds
CAUTION
Do not lift the printer by the validator unit or by the lower
bracket.
CAUTION
The validator contains sensitive electronic equipment. Do not
jar or drop the unit.
40
Table 3. RESET Button Settings
Turns on the scanning beam
Validator goes into calibration mode
Resets validator to the last good calibration
settings and turns off the scanning beam
Result