4. Press ↓ until Overstrike Style displays.
5. Press + or – to scroll through the choices: Grid, Grey,
Checkerboard, or Error Type Msg. The default is Grid.
↵
6. Press
to select the desired value.
↵
7. Press ↓ and
at the same time to lock the
PAUSE to take the printer offline.
8. Press PAUSE again to put the printer online.
Setting I2of5 Checksum
This option allows you to include or exclude the checksum option in
the Interleaved 2 of 5 code as part of the grading. For example, if
you enable this option, then any incoming bar code data without
checksum digits will be graded as a failure, and a Checksum
Failure error will display. The default is Disable.
. .
1. Press
to take the printer offline and place the printer in
.
Menu mode.
2. If necessary, press ↓ and
↵
key.
. .
3. If necessary, press
.
4. Press ↓ until I2of5 Checksum displays.
5. Press + or – to scroll through the options: Enable or Disable.
The default is Disable.
↵
6. Press
to accept the desired value.
↵
7. Press ↓ and
at the same time to lock the
PAUSE to take the printer offline.
8. Press PAUSE again to put the printer online.
Defining Validator Options
↵
key, then press
↵
at the same time to unlock the
until VALIDATOR displays.
↵
key, then press
53