Advanced Validator Options - Printronix ThermaLine T5000r User Manual

Advanced Validator Options

The following items are considered advanced items and are only
visible if Admin User is set to Enable (in the PRINTER CONTROL
menu). Refer to the configuration section of your User's Manual for
more information.
Decodeability
NOTE: This parameter factors into the Overall Grade (page 57).
You can determine how strict the validator grades the wide/narrow
bars and spaces which compose the bar code by setting the
Decodeability parameter to a percentage value from 30% to 90%.
The higher the percentage value chosen, the stricter the validator
grades. The default is 37%.
For example, if the Decodeability value is set to 37%, the validator
gives the bar code a failing grade if the decodeability of the bar
code is at or below 37%.
. .
1. Press to take the printer offline and place the printer in
.
Menu mode.
2. If necessary, press ↓ and
↵
key.
. .
3. If necessary, press
.
4. Press ↑ until Decodeability displays.
5. Press + or – to scroll through the percentage values: 30% to
90%. The default is 37%.
↵
6. Press to select the desired value.
↵
7. Press ↓ and
at the same time to lock the
PAUSE to take the printer offline.
8. Press PAUSE again to put the printer online.
Advanced Validator Options
↵
at the same time to unlock the
until VALIDATOR displays.
↵
key, then press
55