↵
7. Press ↓ and
at the same time to lock the
PAUSE to take the printer offline.
8. Press PAUSE again to put the printer online.
Resetting Validator Data
The validator reports on all bar codes it detects since the last data
reset. For example, you print a large batch of labels with bar codes
and then print a validator report. Then you print another batch of
labels with bar codes and print another report. The report will
contain information on both batch jobs. However, if you reset the
validator data between batch jobs, the second report will only
contain information on the second batch job.
To reset Validator Data:
. .
1. Press
to take the printer offline and place the printer in
.
Menu mode.
2. If necessary, press ↓ and
↵
key.
3. If necessary, press
4. Press ↓ until Clear Data displays.
↵
5. Press
to clear validator data.
↵
6. Press ↓ and
at the same time to lock the
PAUSE to take the printer offline.
7. Press PAUSE again to put the printer online.
Defining The Data Output Destination (Telemetry
Path)
You may want to send a streaming flow of validation data to an
external device during the print job. The default is Disabled. Follow
the procedure below to select the data output destination.
. .
1. Press
to take the printer offline and place the printer in
.
Menu mode.
2. If necessary, press ↓ and
↵
key.
3. If necessary, press
4. Press ↓ until Telemetry Path displays.
Validator Reporting
↵
↵
at the same time to unlock the
. .
until VALIDATOR displays.
.
↵
↵
at the same time to unlock the
. .
until VALIDATOR displays.
.
key, then press
key, then press
47