Message
Unscannable code
check media
(continued)
Validator not
1. The Validator Funct. =
communicating
2. The validator was
Table 6. Message List
Explanation
Enable in the
VALIDATOR menu, but
when the printer was first
powered up it could not
communicate with it.
connected to the printer
and then later removed.
Error Messages
Solution
6. Press PAUSE to clear
the message.
7. In the VALIDATOR
menu, press ↓ until
Clear Data displays,
↵
then press
.
1. Check that the validator
signal cable is securely
connected to the
validator unit.
2. Select Validator Funct.
= Disable in the
VALIDATOR menu.
Save this setting in the
Power-Up configuration
in the CONFIG CTRL
menu and reboot the
printer.
91