Mounting And Commissioning - Siemens SIPROTEC 7SA522 Manual

Mounting and Commissioning

7SA522 Manual
C53000-G1176-C155-3
This chapter is intended for experienced commissioning staff. The staff must be famil-
iar with the commissioning of protection and control systems, with the management of
power systems and with the relevant safety rules and guidelines. Under certain cir-
cumstances particular power system adaptations of the hardware are necessary.
Some of the primary tests require the protected line or equipment to carry load.
3.1 Mounting and Connections
3.2 Checking Connections
3.3 Commissioning
3.4 Final Preparation of the Device
3
372
396
401
430
371