A.4 Default Settings - Siemens SIPROTEC 7SA522 Manual

A.4 Default Settings
A.4.1 LEDs
7SA522 Manual
C53000-G1176-C155-3
When the device leaves the factory, a large number of LED indications, binary inputs
and outputs as well as function keys are already preset. They are summarised in the
following table.
Table A-1 LED Indication Presettings
LEDs Short Text
LED1 Relay PICKUP L1
LED2 Relay PICKUP L2
LED3 Relay PICKUP L3
LED4 Relay PICKUP E
LED5 EF reverse
Dis. reverse
LED6 Relay TRIP
Relay TRIP 3ph.
LED7 Relay TRIP 1pL1
Relay TRIP 1pL2
Relay TRIP 1pL3
LED8 Dis.TripZ1/1p
DisTRIP3p. Z1sf
DisTRIP3p. Z1mf
LED9 Dis.TripZ1B1p
DisTRIP3p.Z1Bsf
DisTRIP3p Z1Bmf
LED10 Dis.TripZ2/1p
Dis.TripZ2/3p
LED11 Dis.TripZ3/T3
Dis.TRIP 3p. Z4
Dis.TRIP 3p. Z5
LED12 AR not ready
LED13 Emer. mode
LED14 Alarm Sum Event
Function No.
503 Relay PICKUP Phase L1
504 Relay PICKUP Phase L2
505 Relay PICKUP Phase L3
506 Relay PICKUP Earth
1359 E/F picked up REVERSE
3720 Distance Pickup REVERSE
511 Relay GENERAL TRIP command
515 Relay TRIP command Phases L123
512 Relay TRIP command - Only Phase
L1
513 Relay TRIP command - Only Phase
L2
514 Relay TRIP command - Only Phase
L3
3811 Distance TRIP single-phase Z1
3823 DisTRIP 3phase in Z1 with single-ph
Flt.
3824 DisTRIP 3phase in Z1 with multi-ph
Flt.
3813 Distance TRIP single-phase Z1B
3825 DisTRIP 3phase in Z1B with single-ph
Flt
3826 DisTRIP 3phase in Z1B with multi-ph
Flt.
3816 Distance TRIP single-phase Z2
3817 Distance TRIP 3phase in Z2
3818 Distance TRIP 3phase in Z3
3821 Distance TRIP 3phase in Z4
3822 Distance TRIP 3phase in Z5
2784 AR: Auto-reclose is not ready
2054 Emergency mode
160 Alarm Summary Event

A.4 Default Settings

Description
519